How to Store cement bags at site

  1. The storage sheds must be weatherproof, with no flooding possibilities on the flooring.
  2. The width of stacks should not be more than 4 bags or 3 m.
  3. The bags must be put on wooden planks and joints at least 100 to 200 mm above the floor.
  4. The distance between the stacks and the outer walls should be maintained at 600 mm.
  5. cement bags should be stacked closely together to minimize air circulation.
  6. To minimize lumping under pressure, cement bags should not be stacked higher than ten bags.
  7. The stack must be thoroughly covered in thick polythene sheets, canvas sheets, or any other appropriate waterproof sheeting.
  8. When removing cement bags for use the 'first in, first out' rule should be followed.
  9. When storing cement for an extended period of time, identify each stack of cement bags with the date of receipt to determine the age of the cement.




Comments

Post a Comment

Popular posts from this blog

Portal beam structures

Image
Portal beam Portal beam structures eliminate the necessity for interior columns, allowing the entire floor area to be utilized without obstructions. This provides greater flexibility in layout and design. Additionally, they facilitate the movement of people, machinery, and goods, which is especially important in factories, warehouses, and retail spaces. This makes the building future-proof, as it can accommodate various uses over time without significant structural changes. Load transfer Vertical loads                                                                                                                                            ...
Read more

Why we use conceal beam in slab design

  Conceal beam A reinforced concrete beam is provided within the slab, whose depth is equal to the depth of the slab. Advantageous of a concealed beam Load Distribution Concealed beams are crucial for distributing loads more evenly across the slab. This distribution reduces stress concentrations at any single point, making the structure more efficient and helping to control cracking. By spreading the loads, the beams ensure that the slab can handle heavier weights, such as those from an overhead water tank, without compromising structural integrity. Aesthetic Appeal Since concealed beams are embedded within the slab, they do not protrude from the ceiling or floor. This results in a cleaner, more aesthetically pleasing finish to the interior space. In residential or commercial buildings, this can be a significant advantage, as it provides a seamless look without visible beams. Increased Headroom By embedding the beams within the slab, the overall height of the room is not reduced. T...
Read more

Number of blocks in one metre square area (for 300 mm x 150 mm block)

Image
Usually, we represent the number of blocks in terms of area (m2) rather than length.                                    Consider a block of dimension 300 mm x 150 mm x 100 mm . ( wall thickness is 100 mm )   but for the accurate value we should consider a 10 mm thick mortar layer around the blocks for binding them to each other. Therefore, we consider a single block's length (including mortar) is 310 mm and its height is 160 mm. The area of one block including mortar is 0.31 m × 0.16 m = 0.0496 m2. The number of blocks in one metre square (m2) can be calculated as 1/0.0496 = 20.16 blocks Any area's block count can be determined by multiplying it by 20.16  
Read more